Hanimex 632LCD

Check availablity: eBay.

Rebranded version of Achiever 632LCD.

The Achiever 632LCD (also sold as Cobra D650, Hanimex 632LCD and Praktica 632LCD) is a flash that can be used for dedicated and/or OTF TTL function with compatible cameras and also works as an auto thyristor flash. It also has a manual zoom function with four flash coverage angles (28, 35, 50 and 85 mm).

Manual and auto modes may work on a DSLR, but in some cases, you may have to isolate or remove the “extra” TTL control pins from the hot-foot to stop the camera from being confused by the legacy OTF TTL protocol.


Generic flash.
Head: 28-85mm coverage, manual zoom.
Swivel & tilt: 0° to +300° swivel, 0° to +90° tilt.
Exposure modes: Auto, Varipower, OTF.
Manual settings: 1/1 to 1/16 in EV 1 steps. (5 steps).
No built-in wireless modes.
Features: LCD.
Trigger voltage: 4.0-5.6 volt.
Batteries: 4xAA.
Field upgradable: No.
Dimensions: 81 x 145 x 102 mm, 377 g.

Zoom head setting:f=35mmf=50mmf=max
Guidenumber (ISO 100, meter):283642
GNs taken from manufacturer's specifications.

Price: USD 170 (new, w/o tax).
Discontinued: Yes.

For a detailed explanation of the above specifications, see the guide.


No literature yet.

Brand profile

Key info

Established: 1947
Country: Australia

The Hanimex Group was founded in Australia in 1947 by Jack Hannes to import European and Japanese cameras, lenses, flashes and photo accessories to Australia and New Zealand. The name was an abbreviation for “Hannes Import Export”. Initally, the equipment sold under the Hanimex brand was produced by Finetta, Montanus, Vredeborch and Dacora in West Germany, by Pentacon in East Germany, and by Tōkyō Kōgaku, Sedic and Royal in Japan. Later the Hanimex Group also sold Hanimex-branded products in the USA.

In 2004, Fujifilm acquired the Hanimex Group.

The Hanimex Group did not manufacture photographic equipment, but relied on various OEMs as a source for its branded products.

Please help us improve DPanswers

Do you think there is an error in this listing or do you have anything to add to these specifications? In particular, if no trigger voltage is listed (or you believe the trigger voltage indicated is wrong) and you own this flash and have measured the trigger voltage, please contact us with the additional or corrected data, or simply send us a message and tell us how we can improve the product database.

This page is from: http://dpanswers.com/roztr/flash_show.php