Check availablity: eBay.
This flash only provides TTL with film bodies. When used on any DSLR it is for all intents and purposes a generic flash unit. Its legacy OTF TTL-mode is incompatible with digital TTL systems, but it may work fine in manual mode. You may have to tape over the “extra ” TTL-pins in the camera's hot-shoe to make sure legacy TTL signaling does not confuse the camera.
Head: 28-80mm coverage, power zoom (w. manual override).
Swivel & tilt: unspecified swivel, 0° to +90° tilt.
Exposure modes: Varipower, OTF.
Manual settings: 1/1 and 1/16 (2 steps).
No built-in wireless modes.
Trigger voltage: 5 volt.
Field upgradable: No.
|Zoom head setting:||f=35mm||f=50mm||f=max|
|Guidenumber (ISO 100, meter):||28||34||40|
|GNs taken from manufacturer's specifications.|
For a detailed explanation of the above specifications, see the guide.
No literature yet.
Sunpak's main business is the planning, development, production and sale of aftermarket electronic flash units. The company also markets general underwater imaging equipment.
Some Sunpak flash units have an auto power save function that may put the unit to sleep after about some time of inactivity (from 5 to 15 minutes, depending on model). When using your flash as a wireless slave, the power save mode may stop the flash from responding after a while. If the manual does not tell you how to disable automatic power save, it may work to hold down the mode and select (SEL) buttons as you power it on, or to hold down the zoom button as you power it on.
Please help us improve DPanswers
Do you think there is an error in this listing or do you have anything to add to these specifications? In particular, if no trigger voltage is listed (or you believe the trigger voltage indicated is wrong) and you own this flash and have measured the trigger voltage, please contact us with the additional or corrected data, or simply send us a message and tell us how we can improve the product database.