avatar

Nikon D700 not recognizing RPT state from SB900

I set the D700 exposure manually (M) and set the SB900 flash to RPT @ 1/8 power, 10 hz.

Test firing the SB900 while on the camera yields correct behavior (3 flashes) but only 1 flash occurs when the shutter is released. ISO 200, 0.3 shutter speed, f/3.2.

If you want to subscribe to this thread and get an email every time the thread is updated, you need to register. Registration is free and carry no obligations.

Leave a comment.

Title (optional):

Comment:

Enter the caracters below into the Verify-field to indicate that you are not a spambot.
To avoid having to enter a verify code, register at the site and log in before posting.
CAPTCHA Image new image 2
Verify code:  (Required.)
Your name:   (Required.)
Your email:   (Will not be published.)

Notice: If you feel that you have found inappropriate content on this site, please let us know by contacting us with the with the URL of problematic page. TIA.

This page is from: http://dpanswers.com/roztr/content_show.php